21
EN
DVD SETTING TROUBLESHOOTING INFORMATIONOPERATING DVDINTRODUCTION WATCHING TVPREPARATION
INITIAL SETTING
OPTIONAL SETTING
Picture Adjustment
You can adjust brightness, contrast, color, tint and sharpness.
1
Press [PICTURE] to adjust the picture quality.
2
Use [Cursor K / L] to select the picture quality type
you want to adjust.
or
BRIGHTNESS
CONTRAST
COLOR
TINT
SHARPNESS
3
Use [Cursor s / B] to adjust the quality.
or
Cursor s Cursor B
BRIGHTNESS
to decrease brightness to increase brightness
CONTRAST
to decrease contrast to increase contrast
COLOR
to decrease color to brighten color
TINT
to add red to add green
SHARPNESS
to make soft to make clear
4
Press [RETURN
] to exit.
Note:
• The picture adjustment setting display will automatically
disappear in a few seconds.
• In PC mode, you can select only “BRIGHTNESS“ or
“CONTRAST“.
5
Closed Caption
TV
You can view closed captioning (cc) for TV programs, movies and news.
Closed caption refer to text of dialogue or descriptions displayed on-screen
for the hearing impaired.
1
Press [SETUP] to display the main menu.
2
Use [Cursor K / L] to select “CAPTION”, then press
[ENTER] repeatedly to change the setting.
e.g.) digital TV mode
or
- TV SETUP -
CHANNEL SETUP
V-CHIP SETUP
LANGUAGE [ENGLISH]
CAPTION [OFF]
BACK LIGHT [BRIGHT]
COLOR TEMP. [NORMAL]
DTVCC
OFF
CAPTION1 - 4
TEXT1 - 4
Caption Mode
CAPTION1 and TEXT1;
are the primary caption and text services.
The captioning or text is displayed in the same
language as the program’s dialogue
(up to 4 lines of script on the TV screen, where it does
not obstruct relevant parts of the picture).
CAPTION3 and TEXT3;
serve as the preferred data channels.
The captioning or text is often a secondary language.
CAPTION2, CAPTION4, TEXT2 and TEXT4;
are rarely available and broadcasters use them
only in special conditions, such as when “CAPTION1”
and “CAPTION3” or “TEXT1” and “TEXT3” are not
available.
• There are 3 display modes according to programs:
Paint-on mode: Displays input characters on the TV
screen immediately.
Pop-on mode: Once characters are stored in
memory, they are displayed all at
once.
Roll-up mode: Displays the characters continuously
by scrolling (max. 4 lines).
5
A84N3UH_A84N1UH_LD195EM8 2_LD19521 21A84N3UH_A84N1UH_LD195EM8 2_LD19521 21 2008/02/15 14:31:262008/02/15 14:31:26