Filter
Top Products
38
EN
O
PERATING DVD
Marker SetupMarker Setup
This feature allows you to assign a speci c point on a disc to be called back
later.
To set a marker
1
During playback, press [MODE] repeatedly until
“ ”/“ ” appears.
e.g.) DVD
_ _ /12 (SEARCH)
2
Use [Cursor
K
/
L
] repeatedly until marker search menu
appears.
or
3
Use [Cursor s / B] to select an available marker within
60 seconds.
or
4
When the playback reaches the point at which you
want to set a marker, press [ENTER].
• Marker is now set.
5
Press [RETURN
] to exit.
To return to the marker later
1
Repeat steps 1 to 2 in “To set a marker”. Use [Cursor s / B]
to select the desired marker.
e.g.) DVD
or
2
Press [ENTER] at the desired marker to start playback
from the specific point which you set.
Note:
• Marker Search menu will disappear in about 60 seconds
when there is no input.
• You can mark up to 10 points.
• To clear a marker, select the marker to be cleared, and then
press [CLEAR].
• Ejecting the disc or turning off the power will erase all
markers.
• Selecting “
” at step 3 in the section “To set a marker”
will also erase all markers.
A84N3UH_A84N1UH_LD195EM8 2_LD19538 38A84N3UH_A84N1UH_LD195EM8 2_LD19538 38 2008/02/15 14:31:562008/02/15 14:31:56