Filter
Top Products
37
EN
DVD SETTINGINTRODUCTION WATCHING TVPREPARATION
INITIAL SETTING
OPTIONAL SETTING TROUBLESHOOTING INFORMATION
OPERATING DVD
Black Level SettingBlack Level Setting
DVD
Adjust the black level to make the dark areas of the TV picture brighter.
1
During playback, press [MODE] repeatedly until
“ “ appears.
OFF (BLACK LEVEL)
2
Use [Cursor K / L] to adjust the black level.
or
ON (BLACK LEVEL)
ON : Makes the dark areas brighter.
OFF : Shows the original picture as recorded.
3
Press [RETURN
] to exit.
Note:
• The setting will be kept even if the unit is turned off.
Stereo Sound ModeStereo Sound Mode
CD
This unit allows you to select a sound mode during audio CD playback.
During playback, press [AUDIO ] repeatedly until the
desired sound mode appears.
STEREO
• Each time you press [AUDIO ], the sound mode
changes as example below.
STEREO
(stereo sound with left and right channels)
L-ch (left channel sound only)
R-ch (right channel sound only)
Virtual SurroundVirtual Surround
You can enjoy virtual surround on your existing 2 channel stereo system.
1
During playback, press [MODE] repeatedly until
“ “ appears.
OFF (SURROUND)
2
Use [Cursor K / L] to select the sound level.
or
1 (SURROUND)
1 : Natural effect
2 : Emphasized effect
OFF : No effects (original sound)
3
Press [RETURN
] to exit.
Note:
• The setting will be kept even if the unit is turned off.
• For audio CD, virtual surround will not be effective if the
sound mode is set to something other than “STEREO”.
(Refer to “Stereo Sound Mode” on page 37.)
• Turn down the level or select “OFF” if the sound is distorted.
A84N3UH_A84N1UH_LD195EM8 2_LD19537 37A84N3UH_A84N1UH_LD195EM8 2_LD19537 37 2008/02/15 14:31:532008/02/15 14:31:53