Filter
Top Products
14
Inserting Batteries into the Remote
Control
You can control the system using the supplied remote. Insert
two "AA" batteries by matching the + and - on the batteries
with the markings in the battery compartment. When using the
remote, point it at the remote sensor on the front panel of this
system.
Notes:
Do not leave the remote in an extremely hot or humid place.
Do not use a new battery with an old one.
Do not drop any foreign object into the remote casing,
particularly when replacing the batteries.
Do not expose the remote sensor to direct sunlight or
lighting apparatuses. Doing so may cause a malfunction.
If you do not use the remote for an extended period of time,
remove the batteries to avoid possible damage from battery
leakage and corrosion.
Use only the size and type of batteries specified.
Be sure to follow the correct polarity when installing the
batteries as indicated in the battery compartment. Reversed
batteries may cause damage to the device.
Do not mix different types of batteries together (e.g. Alkaline
and Carbon-zinc) or old batteries with fresh ones.
Unpacking
Check that you have the following items:
Main unit (1).
Remote control (1).
Audio/Video cable (4 feet x 1).
Owner’s Manual (1).
Installation
This section describes how to connect the system to a TV monitor with audio/video input jacks. You cannot connect this system
to a TV monitor which does not have a video input connector. Be sure to turn off the power of each component before making
the connections.