Filter
Top Products
24
Audio CD Playback
Preparation
ã Switch on the TV set power and select "Video" as the TV
input.
ã Switch on the stereo system's power if the player has been
connected to a stereo system.
Basic Play
1. Press down on the disc compartment lid (OPEN/CLOSE) to
open the disc compartment.
2. Place a disc into the disc compartment.
Hold the disc without touching either of its surfaces and
position it with the printed title side facing up. Align it with
the guides and place it in its proper position.
3. Press the PLAY button.
Note: Make sure the TV type is set to NTSC (factory default).
When the unit is not in use
When the unit is not in use, remove the disc and press the
STAND BY button to turn off the power. The STANDBY indicator
will illuminate.
Notes:
ã The disc continues to rotate while the menu is displayed
even after the player has finished playing a particular item.
When no further selections are to be played, be sure to
press the STOP button to clear the menu display.
ã If the disc is placed in upside down, the On Screen Display
will indicate "CHECK DISC".
For your reference
ã When "INVALID KEY" appears while a button is being
operated, it means that the corresponding operation is
prohibited by the player.
For your convenience
When play is stopped, the unit records the point where
STOP was pressed. Press PLAY again, and play will
resume from this point. When the tray is opened, the
RESUME function will be cleared. The RESUME function
works only with discs for which the elapsed playing time
appears during playback.
Still Picture (PAUSE/STILL)
ã Press the PAUSE/STEP button during play.
Audio CD
ã The player will be placed in the pause mode.
To return to normal play
ã Press PLAY button.