Emprex HD-3701P Flat Panel Television User Manual


 
10
Getting Started (Preparation)
Getting Started (Preparation)
Distance recommendations:
Avoid improper installation and never position the unit where ventilation is impossible.
When installing this TV, distance recommendations must be maintained between the set and
the wall, as well as inside a tightly enclosed area or piece of furniture. Refer to the minimum
distance guidelines shown for a safe operation.
Cleaning the screen:
The screen is coated with a special thin fi lm to reduce refl ection. If this fi lm is damaged, un-
even colors, discoloration, scratches, and other problems that cannot be repaired may occur.
Pay attention to the following when handling the screen.
Do not use glue or adhesive tape on the screen.
Do not write on the screen.
Do not allow the screen to come in contact with any hard objects.
Do not allow condensation to form on the screen.
Do not use alcohol, thinner, benzene or other solvents on the screen.
Do not rub the screen forcefully.
CAUTION:
Operate only from the power source specifi ed (AC 120V, 60 Hz) on the unit.
Avoid damaging the AC plug and cord.
When you are not using this unit for a long period of time, it is recommended that you discon-
nect the power cord from the main outlet.
POWER CORD CONNECTION:
Connect the power cord, after completing all other connections.
1. Connect the power cord to this device.
2. Connect the power cord to the power outlet.
(200mm)
7.87inches
(150mm)
5.9inches 5.9inches
(150mm)
(200mm)
7.87inches
(1)
(2)