Filter
Top Products
21
This section shows you how to connect devices to the S-video and composite video inputs
of your LCD TV. Most devices like VCRs, camcorders, non-progressive scan DVD players,
etc only provide composite video output or S-video output. The steps below are to show
you how to connect two devices simultaneously.
1. Connect the S-video on the back of your camcorder to the S-video (S 1) under AV 1 Input
jack.
2. Connect the audio red (R) and white (L) on the back of camcorder to the audio red (R)
and white (L) jacks on the rear of your LCD TV.
3. Connect the yellow video jack on the back of your VCR to the yellow composite video
input jack on the rear of your LCD TV under AV 2 Input.
4. Connect the red (R) and white (L) audio jacks on the back of your VCR to the secondary
audio red and white (L) jacks on the rear of your LCD TV.
Connecting the S-Video or Composite Video
Connecting the S-Video or Composite Video
S-video
Audio (L)
Audio (R)
S-video
Audio (L)
Audio (R)
Camcorder
VCR
V
S1
AV 1
L
R
AV 2
V
S2
L
R
or
Composite Cable
(notsupplied)
Composite video
Audio (L)
Audio (R)
Composite video(V)
Audio (L)
Audio (R)
S-video Cable
(notsupplied)
SOURCE
TV
AV1
S1
AV2
S2
PC
HDMI
ATSC
COMPONENT
5. Press the “Source” button on the remote control to display the
OSD setup menu and choose AV 2 to display video from the
VCR or choose S 1 to display video from the camcorder.