Epson 200 Home Theater Screen User Manual


 
14
If you place the projector off to the side, aim it straight ahead (rather than at the center of the
screen), then use the horizontal lens shift knob to center the image. Do not place the projector
farther to the left or right than the edge of the screen, or you will not be able to project a
square (or rectangular) image.
The maximum size of the image is determined by the distance from the projector’s lens to the
screen. Depending on how you use the Zoom and other settings, the actual size may be
smaller. Use this table as a rough guide for projector placement:
Also keep these considerations in mind:
Make sure there is plenty of space for ventilation around and under the projector. Do not
set the projector on top of loose materials that could block the vents underneath.
Make sure the projector is within 10 feet of a grounded electrical outlet or extension cord.
Projection distance Maximum image size (16:9)
2.9 feet 30 in. (26 × 14 in.)
3.9 feet 40 in. (34 × 19 in.)
5.9 feet 60 in. (52 × 29 in.)
7.9 feet 80 in. (69 × 39 in.)
9.9 feet 100 in. (87 × 49 in.)
19.9 feet 200 in. (174 × 98 in.)
29.9 feet 300 in. (261 × 147 in.)
Vertical lens shift knob
Horizontal lens shift knob