Filter
Top Products
50 Doing More with Epson MovieMate
Adjusting Picture Quality
You can use the Image page on the Visual Setup menu to adjust the
brightness, contrast, color saturation, tint, sharpness, and other settings
that affect image quality.
Note: You cannot change Image page settings when the Color Mode is set
to Auto.
1. Press on the remote control. You see the Visual Setup menu.
2. Press to select
Image.
3. Press until you see the option you want to set.
You can adjust the following items for various viewing conditions and individual videos:
■ Brightness
■ Contrast
■ Color Saturation
■ Tint
(only works on NTSC signals)
■ Sharpness
■ Color Temp.
(High makes the image more blue; Low makes it more red.)
■ Auto Iris (Adjusts the light intensity based on the brightness of the displayed image.)
4. Press or to increase, decrease, or change the setting.
5. Press to exit the menu.
Using the Others Setup Page
The Others Setup Page lets you select various settings, including screensaver and
MP3/WMA/JPEG file navigation. You can also return all settings to their defaults.
1. Press on the remote control. You see the Language Setup page.
2. Press to display the Others Setup Page.
3. Press to highlight the setting you want, then press to view or change the option.
4. Press to select the option you want, then press to save it. You can choose from
the following:
■ Screen Saver: By default, the screen saver starts when a still image is projected for
more than 15 minutes. Select
Off to turn off this setting.