Filter
Top Products
Problem Solving 67
There is a problem with the sound quality.
■ Try pressing the button on the remote control and adjusting the sound mode. (Make
sure the toggle switch on the remote control is set to the
Func- position.)
■ If you’re using external equipment, you may need to adjust the Audio settings in the
setup menu (see page 51).
■ If the sound is distorted or too loud, try pressing the — Volume button on the projector
or on the remote control.
No sound can be heard from the microphone.
■ Make sure the microphone is connected correctly. See page 33.
■ Increase the Mic Input Level. See page 33.
■ The projector is compatible with dynamic microphones. Make sure you are not using a
plug-in power microphone.
Subtitles do not appear.
■ The DVD might not include subtitles.
■ Make sure the subtitle language is not set to OFF (see page 46).
You can’t change the language on a DVD.
The DVD might not include multiple languages.
Problems with External Video Equipment
No picture appears on the screen.
■ Make sure the equipment is turned on.
■ Press the button on the projector or the button on the remote control.
■ Press the or Play button on the external equipment.
You see the message No Signal.
■ Make sure the equipment is turned on.
■ Make sure your cable(s) are connected correctly (see page 34).