Filter
Top Products
Caring for Your Epson MovieMate 59
6. Gently insert the new lamp and tighten its screws.
Caution: Don’t touch the glass portion of the lamp with your bare hands; the invisible residue
left by the oil on your hands may shorten the lamp life. Use a cloth or gloves to handle the new
lamp assembly.
7. To replace the lamp cover, slide it into position, then tighten the screw. (The projector
won’t work if the lamp cover is loose.)
8. After replacing the lamp, you need to reset the lamp timer, as described in the next
section.
Resetting the Lamp Timer
1. Connect the power cable and press the button on the projector or the button on
the remote control to turn the projector on.
2. Press on the projector on the remote control. You see the Visual Setup menu.
3. Press to highlight
Info, then press on the projector or on the remote
control to select it.