Filter
Top Products
14
Using Projector Groups
You can register projectors as a group if you want to provide quick and
easy access to other computers. You can also export or import group
information as a file to another computer. Projectors must be
connected to the network in Access Point mode, and must be on the
same network segment as the computer used to create the group, or
the computers that import or export group information.
Creating a Group
You can register up to 16 projectors as a group, and all projectors must
be part of your wireless network.
1. Start NS Connection. Then click the
Extension button on the
EMP NS Connection screen. You see this screen:
2. Select
Use IP connect mode and Use Group List.
t
ip
Use a static IP address when
c
onfiguring a projector for
t
he network if you plan to
u
se it in a group. If you use
D
HCP, the projector’s IP
a
ddress will change every
t
ime you turn it off and on
a
gain, and you will have to
r
ecreate the projector group.
Select these
two boxes
Bernslip.fm Page 14 Friday, December 12, 2003 3:02 PM