Filter
Top Products
7
The first time you start NS Connection in Windows, you see a
window asking you to select your network.
2. Select the IP address for your computer’s network adapter card
and click
OK.
You see the screen below. (If you have previously started NS
Connection, or you’re using a Macintosh, this is the first screen
you see.)
If the connection is working properly, you see your projector
listed. If you have additional EPSON projectors on the network,
they are also listed, along with their status.
note
If you don’t see your network
adapter’s IP address, allow a
minute for it to appear. If
your access point uses
DHCP, sometimes it takes a
minute for the server to pick
up the IP address.
note
If you don’t see the Switch
network window and you
want to change to a different
network adapter, click the
Extension button. In
Windows, click
Switch
LAN
. On Macintosh, click
Set up network.
Select projector
This box indicates
projector status
Bernslip.fm Page 7 Friday, December 12, 2003 3:02 PM