Filter
Top Products
6
■ For optimal performance, set your screen resolution to
1024 × 768 or lower with a color depth of Thousands
(16 bit).
■ When making Location settings, you can select the desired
location and change all the network settings one at a time.
4. Make sure the following is displayed in the communication status
bar in the top right corner of the screen:
■ If the projector has been assigned an ESSID name, click the
communication status icon and select the projector’s ESSID
name from the menu.
■ If you are using the wired LAN Connection mode, click Turn
AirPort Off
.
Using EMP NS Connect for Wireless
Projecting
Your projector now includes version 1.20 of EMP NS Connection for
Windows (equivalent to version 1.0 for Macintosh). If you are using a
Macintosh, the screens will look different from those shown in this
section, but the same features are available.
Follow the instructions in your Projector User’s Guide to install the
software, start EasyMP, and set up your projector and computer in
either Ad Hoc mode (computer to computer) or Access Point mode.
Then follow these steps:
1. Make sure you’ve installed your wireless 802.11b card. Then do
one of the following:
■ Windows: select EMP NS Connection from the Start menu.
■ Macintosh: double-click the EMP NS Connection icon in
your Applications folder.
note
If you see a message during
installation that the
EPSON GDI Monitor
Driver has not passed
Windows Logo testing, click
Continue Anyway.
Bernslip.fm Page 6 Friday, December 12, 2003 3:02 PM