Filter
Top Products
25
12. When done making your settings, highlight the OK button at the
top of the screen, then press
Enter. Highlight the OK button
again and press
Enter to return to the main EasyMP Network
Screen.
Understanding the Notification Messages
If a projector experiences a problem, it sends an e-mail message to
each of the addresses you provided using EMP NetworkManager. The
message includes the heading “EPSON Projector” in the subject line.
The body of the message contains:
■ the name of the projector
■ the projector’s IP address
■ a description of the problem
The problem descriptions are similar to the errors reported by EMP
Monitor:
■ Internal problem
■ Fan-related problem
■ Sensor problem
■ Lamp timer failure
■ Lamp burned out
■ Lamp cover open
■ Overheating (projection turned off automatically)
■ High-speed cooling in progress (the projector is getting too hot
but continues to operate)
■ Lamp replacement notification (the lamp is nearing the end of its
life)
If a plus (+) sign appears before the description, it indicates that a
problem has occurred. A minus (–) sign appears when the problem
goes away or is resolved.
note
If a projector develops a
critical problem, it may not
be possible for it to report the
error.
Bernslip.fm Page 25 Friday, December 12, 2003 3:02 PM