Filter
Top Products
5
Configuring Your Network Connection
Follow the instructions in your Projector User’s Guide to start EasyMP
and insert the EPSON 802.11b card in the projector.
Determine whether you will use Ad Hoc mode or Access Point mode
to connect to the projector. Follow the instructions in your Projector
User’s Guide to configure the projector for the mode you will be using.
Then follow the instructions beginning on page 5 to set up your
Macintosh in either Ad Hoc mode or Access Point mode.
Before you can connect to the projector, you need to make sure the
network settings on your Macintosh match the settings on the
projector.
1. From the Apple pull-down menu, select
System Preferences.
Then double-click the
Network icon. You see the Network
Settings window:
2. Under
Port Configurations, select AirPort for a wireless
network or
Built-in Ethernet for a wired network.
3. Click
Apply Now. Then close the window.
note
EMP NS Connection does
not support Macintosh
Channel Ad Hoc mode.
Check the port you want to use
note
Make sure that only one port
is selected.
Bernslip.fm Page 5 Friday, December 12, 2003 3:02 PM