Epson LS47P1 Projection Television User Manual


 
36 Setting Up the TV
If you see a blank screen with No Signal at the bottom:
Turn on the source (VCR, DVD, etc.)
Insert a disc or tape, if you’re viewing one, and press Play
•Press the TV/Video button to select the source
Check the cable connections
If it’s still not working, see “Basic Operation Problems” on page 116.
Setting the Volume
To turn the TV speaker volume up or down, use the Vol. up and down buttons on the TV
panel or remote control.
To mute the sound, press the Mute button on the remote control.
No Signal
Note
If you connect
headphones to the TV, the
TV speaker sound shuts off.
You can press Mute to
mute the headphone
audio too.
If you connected your TV to
an audio receiver and
additional speakers, the
Vol. buttons control the
sound from those speakers
too.
Volume
button
Mute
button