Escient DVDM-100 DVD Player User Manual


  Open as PDF
of 107
 
PAGE 85
FireBall™ DVDM-100 User’s Manual
EXTERNAL CONTROL
SURROUND MODE SETTINGS
FireBallwillautomaticallyswitchthepropervideoandaudiooutputfromtheappropriateDVD
changerwhenyouplayamovietitle.Thisallowsyoutouseoneinputonyoura/vreceiverorTV
insteadof3.Youmayuseeithercomposite,S-video,orcomponentvideoconnectionsandanalog,
digital, or 5.1 analog audio connections from each changer to the FireBall. Use the same tye of
connectionsforallchangers.AlsousethesametypesofconnectionsfromFireBalltoyourA/V
receiverorTVmonitor.
FireBall is equipped with the following video input and output ports:
• 2compositevideooutputs(touchpanelandTV)
• 2S-videooutputs(touchpanelandTV)
• 1setofcomponentvideooutputs
• 3setscompositevideoinputs
• 3setsofS-videoinputs
• 3setsofcomponentvideoinputs
Follow these steps to set the Surround Mode Settings:
1. Press the SETUP key on the remote control.
2. Select the External Control Menu.
3. Select the Surround Mode Settings.
5. Set the desired media to the desired receiver mode.
6. Highlight the SAVE button and press SELECT to save the settings.
Note: FireBall does not alter the video or audio signal quality in any way. All video and
audio signals are switched and then passed through FireBall to your home theater system.
Because video and audio signals are switched, you must use matching cable types
between your changers, FireBall, and your home theater.
Note: Surround Mode Settings is compatible with select Denon and Marantz A/V receivers
with RS-232 control. Please contact Escient or your Escient dealer for more information
about this feature.
 previous next