EverFocus ECOR 264-8/4 D2 DVR User Manual


 
18
2.2 GENERAL FRONT PANEL OPERATION
2.2.1 How to select a channel
1. In a view consisting of more than one channel, press the arrow keys (Up/Down/Right/Left) to scroll
through each channel that is displayed. The selected channel will be highlighted by white frame.
Pressing the left or “right” arrow when the last/first camera (1,4 or 8) is highlighted will select all
cameras.
2.2.2 OSD Root Menu
1. Press Menu key to display the DVR menu bar. Use the left/right arrows to scroll over each icon. The
title for each icon will be displayed on top of the menu bar.
2. Press Enter key on any icon to perform that action. These actions are covered in detail in Chapter 3
3. Press Menu to close the DVR menu bar.
2.2.3 Front Panel Key Review
The basic principle of front panel operation is to use arrow keys to navigate among the menu items. Use
the Enter key to confirm a selection or enter the next level menu. Press the Menu key to enter the Main
Menu or exit from the current level of the menu.
2.2.4 Operation in Configuration Menu
Press Menu”, use the arrow keys to highlight the “Configuration” icon, and press Enter with
Configuration icon highlighted to bring up the Configuration menu.
NOTE: If the require password option is active, you will need to log in first. Refer to “Section 3.2 LOGIN for
information on logging in.
The menu (shown in Figure 2-3 OSD Menu ) is divided into 3 main sections.