81
Firmware Upgrade: Press “Upgrade” to upgrade the firmware.
NOTE: To perform a Firmware Upgrade, you will need to connect a USB flash device with
the desired firmware. Do not disconnect the USB device or turn off the power to the
unit during the upgrade; this can cause the system to fail to recover, requiring factory
service to repair.
Configurations
Load Factory Default: Click “Load” to restore all menu settings to the default values. User Account,
Network IP Settings, and Time are not affected. 3GP streaming is disabled by default.
Load From USB: Click “Load” to upload saved DVR configuration settings from a USB flash device.
Save To USB: Click “’Save” to save the current DVR configuration settings to a USB flash device.
Language: Choose which language the DVR uses. The available languages may vary based on region.
4.11 INFORMATION
Figure 4-38 is a screenshot of the INFORMATION MENU. This menu displays important (read only) system
information.
Figure 4-38 Information Menu – System
4.11.1 System
System
Version: Displays firmware version number.
Model: Displays DVR model number.
NTSC/PAL: Displays current video format selected based video format on Camera 1 input at boot up.