Filter
Top Products
70
4.7.4 Alarm Server
Figure 4-27 Network Menu – Alarm Server
This menu defines the parameters for communicating with a PC running PowerCon software.
Server IP1~3: IP address of client PC with installed PowerCon Software. The network alarm can be
transmitted to up to 3 addresses.
Protocol: Select the protocol type for alarm transmission:
UDP: User Datagram Protocol
TCP: Transmission Control Protocol
Note: Please use UDP for LAN applications only as this mode is not secure for
internet connections.
Port: Select the transmission port for network alarm messages
Network ID: The network ID is an identifier for the alarm transmitter (DVR sending the alarm).
Notes:
1. The network ID must consist of 10 digits
2. This is a numeric field; characters are not allowed.
3. Please do not use any left-hand zeros.