Filter
Top Products
6
1.5 REAR PANEL
During initial setup you will be connecting your DVR to multiple input and output devices. This is done
through the rear panel.
Figure 1-2 Rear Panel
○
1
POWER: Power input 100~240 VAC.
○
2
eSATA port: Used for external SATA HDD bay
○
3
Audio In: Connect line level output of an audio preamplifier to the audio input connection
corresponding to the appropriate camera.
○
4
LAN: RJ-45 socket for 1 GB network interface, connectabe also to 10/100 Mbps network
structures. There are two LEDs on the LAN jack; Green LED means network is
connected, amber LED flickers when data is being exchanged.
○
5
USB 2.0: USB port recommended for connecting the USB mouse.
○
6
RS232 socket: 9-pin D-Sub RS-232 interface (for service and support purpose)