Filter
Top Products
73
3. Selecting alarm: Use Right/Left arrow key to select an alarm to configure. Selected alarm number
will be highlighted by a blue frame. See above image.
4. Enter time bar editing mode: Use Up/Down arrow key to switch to time bar editing mode. When
this mode is selected, the area surrounding the time bars will be highlighted within a blue frame.
5. Select desired time bar for setting: press the Enter button, the first time bar will be selected and
highlighted in a red frame. See below image. Use the Up/Down arrow keys to choose the desired
time bar for setting.
6. Editing blocks in a time bar: when a time bar is chosen (highlighted in red frame), the press
Enter button to select that time bar for configuration; then the first block of this bar will be selected
(highlighted in blue frame). Use Right/Left arrow key to move to the desired block for the starting time,
and press the Enter button again to confirm. At this time, the current and all following blocks will turn
into gray, which means this gray timezone has been set to the recording mode of gray (Alarm Action
off). User can also change the timezone to a different record mode by following instructions in the next
step.
7. Changing recording mode (color) of a timezone: Use Right/Left arrow key to select the first
block of a timezone. Press the Enter button, and this timezone will switch to another color, which
means switching to another recording mode. The color switch sequence is gray->orange->gray.