Filter
Top Products
Recording Error
Disc is full.
Recording Error
You cannot record more
than 99 titles on one disc.
Recording Error
You cannot record more the
999 chapters on one disc.
Recording Error
You cannot record on this disc
as Control Information is full.
Recording Error
You cannot record on the
disc as Power Calibration
Area is full.
You are trying to record onto
the disc which has no space
for recording.
Insert the recordable disc with
enough recording space.
Recording Error
This disc is already finalized.
CauseError message Solution
You are trying to record onto the
disc on which the number of
recording titles comes up to the
maximum (99).
You are trying to record onto the
VR mode DVD-RW disc on which
the number of recording chapters
comes up to the maximum (999).
This disc has no space to write
the Control Information when
recording or deleting contents.
When editing has been repeatedly
performed, the control Information
area may come up to be full even
the recording area has enough space.
This disc's working area for
recording is full.
When recordings are performed
repeatedly onto an unstable disc,
this area may come up to be full.
You are trying to record onto
the disc already finalized.
Delete unnecessary titles
(pages 65, 69, 78).
Delete unnecessary chapter
markers (pages 73, 82).
Delete unnecessary titles
(pages 65, 69, 78).
Insert a new disc.
Release the finalizing for this disc
(page 44).
(No area for new recording)
(The maximum is 99)
(The maximum is 999)
You can watch the TV programs with the tuner of the
unit. (Usually channel 3 or 4 of the TV is available for
the RF converter setting.) Be sure to connect the unit
to a TV using the RF cable. Refer to page 13.
1
Select channel 3 on your TV.
• Be sure that the unit is in DVD mode.
2
Press VIDEO/TV button on the remote control.
• If noise appears, change the RF output channel
of the unit to CH 4 by pressing VIDEO/TV but-
ton for 3 seconds.The RF output channel will
alternate between CH3 and CH4 as follows.
• Changing the RF output channel is available only
when the unit is in DVD mode.
104
Troubleshooting (cont’d)
Others
for more than
3 seconds
RF converter output
POWER
OPEN/
CLOSE
ABC
JKL
TUV
DEF
MNO
WXYZ
SPACE
.@/:
GHI
PQRS
VCR Plus
+
AUDIO DISPLAY
REC
MONITOR
CLEAR/
C.RESET
TOP MENUMENU/LIST
SETUP
RETURN
SKIP
STOP PLAY
FWDREW
PAUSE
SLOW
REC
SPEED
REC/OTR
VCR
VIDEO/TV
DVD
CH
SEARCH
MODE
CM SKIP
ZOOM
2
SKIP
SLOW
REC
SPEED
REC/OTR
VCR
VIDEO/TV
DVD
CH
(
RF ON
)
CH4
3 seconds
(
RF ON
)
CH3
(
RF ON
)
CH4
3 seconds
3 seconds
3 seconds
*
If you are still having trouble with this unit after checking Troubleshooting, write down the error code and the
error description for calling our help line mentioned on the front page to locate an Authorized service center.
E9460UD(EN/SP/FR).qx3 04.8.10 10:48 Page 104