Filter
Top Products
43
2. Use [K/L] to select “Manually enter your
SSID”, then press [OK].
• Wireless Router Name (SSID) entry screen
will appear. Enter the wireless network name
(SSID) using cursor buttons, number buttons
and color key, then press [YELLOW].
Others
_
Manually enter your SSID
abcdefghij
1 234567890
uvwxyz. -_
OK
klmnopqrst
Clear
All Clear
a/A/@ OK
Wireless Router Name (SSID)
• List of authentication settings will appear.
3. Follow steps 6 to 9 in “Find wireless network”
on page 42.
Wireless Router Status
You can check the current status of “Wireless
Router” setting.
1. Follow steps 1 to 3 in “Find wireless network”
on page 42.
2. Use [K/L] to select “Wireless Router Status”,
then press [OK].
• The list of current wireless router settings,
and the confirmation message will appear.
Select “Yes” to complete the settings.
3. Press [RETURN] to go back to the previous
screen, or press [SETUP] to exit.
<Advanced Settings>
After you set up the “Wireless Router” setting,
set the network setting to “Easy” (wireless) or
“Custom”(wireless).
Easy (wireless)
To set the network setting to “Easy”(wireless),
follow the following procedure. For details of this
setting, refer to “Easy (Wired)” on page 39.
• If you select “Yes” in step 7 of “Find wireless
network” on page 42, skip to step 3.
1. Follow steps 1 to 2 in “Find wireless network”
on page 42.
2. Use [K/L] to select “Advanced Settings”, then
press [OK].
3. Use [K/L] to select “Easy”, then press [OK].
Custom (wireless)
To set the network setting to “Custom”(wireless),
follow the following procedure.
• If you select “Yes” in step 7 of “Find wireless
network” on page 42, skip to step 3.
1. Follow steps 1 to 2 in “Find wireless network”
on page 42.
2. Use [K/L] to select “Advanced Settings”, then
press [OK].
3. Use [K/L] to select “Custom”, then press
[OK].
• For details of each setting, refer to following
pages.
“IP Address Setting” / “DNS Setting”:
Refer to “IP Address Setting / DNS Setting” on page 40.
“Proxy Setting”:
Refer to “Proxy Setting” on page 40.
“BD-Live Setting”:
Refer to “BD-Live Setting” on page 41.
“MAC Address”:
Refer to “MAC Address” on page 41.
Note
• You cannot select “Advanced Settings” if
“Wireless Router” setting is not completed.
Disable
Deactivate all the network connection and
settings.
1. In “Network Connection” menu, use [K/L] to
select “Network Selection”, then press [OK].
2. Use [K/L] to select “Disable”, then press
[OK].
3. Press [RETURN] to go back to the previous
screen, or press [SETUP] to exit.
Note
• The network connection can be reactivated
by setting network connection to “Wired” or
“Wireless”.
Software Update
[SETUP] “Other"“Software Update”
This unit lets you update the software yourself
using a software update disc.
To update the software, you must first download
the latest version software to a disc, then execute
“Software Update”.
Current Version
You can confirm the current software version.
1. In “Software Update” menu, use [K/L] to
select “Current Version”, then press [OK].
2. Press [OK] or [RETURN] to exit.
Disc Update
1. Prepare a software update disc:
Access www.magnavox.com, and download
the latest version software to a blank disc by
following the directions described on the site.
• Use a blank disc and download one software
per disc.
• For more details on how to download the
software, please refer to the site.
2. In “Software Update” menu, use [K/L] to
select “Disc Update”, then press [OK].
3. Use [K/L] to select “Yes”, then press [OK].
• Disc tray will open automatically.
4. Insert the software update disc obtained at
step 1.
5. After completing loading disc, confirmation
message will appear. Select “Yes” and press
[OK] to start updating.
6. After the disc update finishes, this unit will
restart and eject the disc.