Filter
Top Products
56
Chapter 3: Using Your Plasma TV Controls
www.gateway.com
5 If you are setting the password for the first time, use the number buttonpad
to enter the default password (0000). Each time you enter a number, the
? (question mark) changes to a + (plus sign).
- OR -
If you have previously set a password, use the number buttonpad to enter
your previously set password. Each time you enter a number, the
? (question mark) changes to a + (plus sign).
6 Use the number buttonpad to enter a new four-digit password.
7 When prompted, enter the new password again.
Resetting your customized password
If you lose or forget your customized password, use this procedure to reset your
password to the factory default setting (0000).
To reset your customized password:
1 Press and hold the left MENU/ADJ arrow button on your remote control
for seven seconds.
2 Press and hold the right MENU/ADJ arrow button on your remote control
for seven seconds.
3 Press the QV button on your remote control. Your password is now reset
to the factory default (0000).
Tips & Tricks If you enter the old password incorrectly three times, your
plasma TV displays the TV menu in the OSD.
If you enter the new password incorrectly three times, your
plasma TV will display the NEW PASSWORD box again.
You will have to set up your new password again.