Filter
Top Products
__-~
-
-
-
-~
~-
(Connecting Up
-
-
-
-
~-
~.
~
>a
1
,Easy
connections
The setup
descrrbed
here is a basic setup
that allows you to play discs
using
Just
the
cables supplied
with
the player. In this setup,
stereo audio IS played through the speakers
111
your
TV.
A
Important
l This player is equipped with copy
protection technology. Do not connect
this player to your TV
via
a VCR (or your
VCR via this player)
using
AV cables, as
the picture from this player will not
appear properly on your TV. (This player
may also not be compatible with some
combination
TV/VCRs for the same
reason; refer to the manufacturer for
more information,)
1
Connect the VIDEO OUT and AUDIO
OUT jacks to a set of A/V inputs on your
TV.
Use the supplied audio/video cable, connect-
ing the red and white plugs to the audio
outputs and the yellow plug to the video
output. Make sure you match up the left and
right audio outputs with their corresponding
inputs for correct stereo sound.
See below if you want to
use’SVideo
or
component video cables for the video
connection.
2 Connect the supplied AC power cord
to the AC IN inlet, then plug into a power
outlet.
En