Filter
Top Products
Iii
Note
The picture quality when using frame
reverse is not as good as frame ad-
vance.
Depending on the disc, normal playback
may automatically resume when a new
chapter IS reached.
When changing direction with a DVD
disc, the picture may ‘move’ in an
unexpected way. This IS not a
malfunction.
Looping a section
of
a disc
The A-B Repeat function allows you to
specify two points (A and B) within a track
(CD and Video CD) or title (DVD) that form a
loop which is played over and over.
A-B Repeat is not available with MP3 discs,
Video CDs in PBC mode, or
unfinalized
CD-R/RW discs.
1
During playback, press PLAY MODE
and select ‘A-B Repeat’ from the list of
functions on the left.
2
Press ENTER on
‘A(Start
Point)’ to set
the loop start point.
3
Press ENTER on ‘B(End Point)’ to set
the loop end point.
Play
Made
After pressing ENTER, playback jumps back
to the start point and plays the loop.
l The minimum loop time is 2 seconds,
4
To resume normal playback, select
‘Off’ from the menu.
Using repeat play
There are various repeat play options,
depending on the kind of disc loaded. It’s
also possible to use repeat play together with
program play to repeat the tracks/chapters in
the program list (see Creating a program list
on
page 33).
Repeat play is not available with Video CDs
in PBC mode, or unfinalized CD-R/RW discs.
1
During playback, press PLAY MODE
and select ‘Repeat’ from the list of
functions on the left.
ml
En