a,(
-.
0
The Initial Settings Menu
--=~----I3
DTS Out
l Default setting: Off
You only need to make this setting if you
connected this system to an AV receiver (or
other component) using one of the digital
outputs.
If your AV receiver (or other connected
component) is compatible with high
sampling rates (96
kHz),
set this to
96kHz,
otherwise set it to 96kHz
>
48kHz (96
kHz
audio is converted to a more compatible 48
kHz).
Check the manual that came with the
other component if you’re unsure whether it
is 96
kHz
compatible.
If your AV receiver (or other connected
component) has a built-in DTS decoder, set
this to DTS, otherwise set to Off. Check the
manual that came with the other
componen
if you’re unsure whether it is DTS compat-
i ble.
t
MPEG Out
l Default setting: MPEG
>
PCM
You only need to make this setting
ifyou
connected this sys
tern
to an AV receiver (or
other component) using one of the digital
outputs.
olsplay
Options
I#
Note
l If you set to DTS with a non-DTS
compatible amplifier, noise will be
output when you play a DTS
disc.
96kHz PCM Out
l Default setting: 96kHz
>
48kHz
You only need to make this setting if you
connected this system to an AV receiver (or
other component) using one of the digital
outputs.
If your AV receiver (or other connected
component) is compatible with MPEG
audro,
set this to MPEG, otherwise set it to MPEG
>
PCM (MPEG audio is converted to more
compatible PCM audio), Check the manual
that came with the other component if you’re
unsure whether it is MPEG audio compat-
i ble.
m
1
En