Filter
Top Products
Recording a Program
Your VCR provides different recording features. The following sections describe these features.
Recording Speeds
Press SPEED on the remote to select a recording speed (SP, LP, or EP). The speed you select appears on the TV screen.
Types of Recordings
SP (Standard Play) gives the best quality recording. This is why most prerecorded, rental
tapes are recorded in SP. Fewer programs can be recorded on the tape. Special effects such
as pause, frame advance, slow motion, and picture search work well in this speed.
LP (Long Play) gives twice the recording time of tapes recorded in SP. Special effects in
playback are not recommended in LP.
EP (Extended Play) gives three times the recording time of tapes recorded in SP. Special
effects such as pause, frame advance, slow motion, and picture search work well in this
speed.
Recording Pause
This feature allows you to prevent recording short passages of unwanted material.
Press PAUSE on the remote during recording to stop and start recording.
The VCR automatically switches from pause to stop after a few minutes.
Basic Recording – Operating Instructions
To Make a Recording
Turn on the TV and tune it to the VCR viewing channel, either 3, 4, or the TV’s video input channel.
1. Insert a tape with its safety tab in place. The tape indicator appears in the VCR’s display
panel.
2. If you are using one of the basic hookups, make sure the VCR indicator appears in the
VCR’s display panel. If not, press TV•VCR to turn it on.
3. Use SPEED on the remote to select a recording speed. The tape speed indicator appears
on the TV screen.
4. Select the channel to be recorded. The channel number appears in the VCR’s display
panel and on the TV screen.
5. Press REC on the remote or RECORD on the VCR to begin recording.
To Stop a Recording
Press STOP on the remote or the VCR’s front panel.
Watch a TV Channel While VCR is Recording a Different Channel
1. Follow steps 1 through 5 above.
2. If you are using one of the basic hookups, press TV•VCR to switch to the TV channel.
The VCR indicator turns off in the display panel.
3. Select the channel you want to watch with the TV’s channel buttons.
4. Press STOP on the VCR or remote when the recording is finished.
Recording Time
Cassette SP LP EP
T-120 2Hr 4Hr 6Hr
T-160 2Hr 40Min 5Hr 20Min 8Hr
16