Filter
Top Products
23
References
Location of Controls
Back Panel
CH3 CH4 Switch
Selects the channel to which you tune the TV to
see the VCR picture if you connect the VCR
using one of the basic hookups.
ANT (Antenna) IN Connector
Receives a signal from an antenna or cable
system when attached.
RF OUT Connector
Passes signal to TV using the cable supplied.
VIDEO IN and AUDIO IN Jacks
Receives signals from another component like a
VCR or camcorder when it is connected to these
jacks. Use
INPUT on the remote to select.
VIDEO OUT and AUDIO OUT Jacks
Sends signals from VCR to another component like
a VCR or camcorder when it is connected to these
jacks.
RF OUT
ANT IN
CH 3
IN
AUDIO
VIDEO
OUT
CH 4