Filter
Top Products
6
Hooking Up the VCR
Connecting Two VCRs for Copying Tapes
Playback VCR
RF Coaxial Cable
(supplied)
Recording VCR
Audio/Video
Cables
RF Coaxial
Cable
or
Use the hookup to the TV
as previously selected on
pages 3, 4, or 5.
From Antenna, Cable
or Cable Box
RF OUT
ANT IN
IN
AUDIO
VIDEO
OUT
RF OUT
ANT IN
3 CH. 4
IN
AUDIO
VIDEO
OUT
CH 3
CH 4
Playback VCR (only)
Recording VCR
Audio/Video
Cables
Audio/Video
Cables
RF Coaxial Cable
(supplied)
or
Use the hookup to the TV
as previously selected on
pages 3, 4, or 5.
From Antenna, Cable
or Cable Box
RF OUT
ANT IN
IN
AUDIO
VIDEO
OUT
RF OUT
ANT IN
IN
AUDIO
VIDEO
OUT
CH 3
CH 4
CH 3
CH 4
Option A hookup.
Use this hookup for a simple connection
which requires fewer accessories.
1. Select a hookup from pages 2 through 5
and then modify with this connection.
2. Set the CH3 CH4 switch on the playback
VCR to either channel 3 or 4.
Tune the recording VCR to this channel to
receive the signal from the playback VCR.
3. Connect as shown.
This connection may require additional
accessories not provided.
4. Plug in power cords of VCRs and TV.
5.
Option B hookup.
Use this hookup for slightly improved copy
quality and more convenient operation —
use of the
TV•VCR button is not required.
1. Select a hookup from pages 2 through 5
and then modify with this connection.
2. Connect as shown.
This connection requires additional accessories
not provided.
If your other VCR is not stereo, you may need a
Y-adapter to hear sound from both channels.
3. Plug in power cords of VCRs and TV.
4.
Select the line (audio/video) input (L) on the
recording VCR to receive the signal from the
playback VCR.
Continue to page 8.
Continue to page 8.
B
A
Caution: The unauthorized recording of
television programs and other materials
may infringe the rights of others.