Go-Video 3000 DVD Player User Manual


 
CHAPTER 1 - SETUP 5
Front Panel Controls
Power On/Off
Button is IN
- A/C power to system
(normal operating mode; first time
button is pressed, the system automati-
cally turns on).
Button is OUT
- No A/C power to
system; use for extended off periods
(vacation) or during adverse weather
conditions (lightning). CAUTION: Be
sure unit is in Standby mode (LED lit)
before depressing to prevent loud pop
and possible speaker damage.
Standby Lamp - Functions via the remote
control POWER key: LIT - System is in
Standby Mode; NOT LIT - System is on
and operational.
Play/Pause - Begin or pause disc play.
Use to power on the system from
Standby mode.
Skip/Search - Press once to skip or
press and hold to search a video
chapter or music track. Works in
forward or reverse.
Display - Operational information is
displayed here; see page 6.
DVD - Press to view and listen to a
DVD, VCD or CD in the built-in disc
player.
VCR - Press to view and listen to a VCR
connected to the rear audio/video
inputs marked VCR IN.
AUX (TV) - Press to view and listen to a
TV or other equipment connected to
the rear audio/video inputs marked
AUX IN.
Volume - Turn clockwise to increase
volume of attached speakers; turn
counterclockwise to decrease volume.
Note: The volume knob functions as an
“infinite” knob, i.e. there is no set
position for minimum volume or
maximum volume. Typically, two full
revolutions of the volume knob will
move between minimum and maxi-
mum volume or vice versa.
Open/Close - Press to open and
close the disc tray. Use to power
on the system from Standby
mode.
Disc Tray - Press OPEN/CLOSE to
open and close the disc tray to
insert or remove a DVD, VCD or
CD.
Stop - Stops disc play.
Headphone Volume - Use to adjust
headphone volume level.
Headphone Jack - Attach head-
phones here for private listening.
1
2
4
5
6
7
8
9
3
10
11
12
13
14
12 3 4 5 67
10
8
11
9
121314