Go-Video VHS-VHS VCR User Manual


 
CHAPTER 2 - OPERATING YOUR DUAL-DECK VCR 19
While you are playing a tape, you can use the remote
control or front panel keys to perform the following
functions:
When you are using any special playback function,
press
PLAY
to resume normal playback, or
STOP
to
stop the tape. You can also Pause, Rewind, Fast-
Forward, and Slow down the playback by pressing
the appropriate keys.
Press
PAUSE
to enter Play Still mode. The picture
will freeze on the screen. PAUSE/STILL will
appear on the Front Panel Display. While in Play
Still mode, you can press
PAUSE
again to advance
the picture one frame. If the deck remains in Play
Still for 5 minutes, it will automatically begin to
play again to prevent possible damage.
Press
SLOW-
or
SLOW+
to enter Slow Motion playback.
The tape will play at slow speed. SLOW will appear
on the Front Panel Display. While in Slow Motion
playback, each time you press
SLOW-
play slows
down a little and each time you press
SLOW+
,
play speeds up a little. These are also the
8
and
9
buttons.
Press
FF
to enter Forward Picture Search
(CUE 1). The tape will run at high speed and you
will be able to see the picture. CUE will appear on
the Front Panel Display.
Press
FF
again to enter Jet Search (CUE 2). The
tape will run at extra high speed and you will be
able to see the picture. You will see CUE blinking
on the Front Panel Display. Press
PLAY
to resume
playback.
Press
REW
to enter Reverse Picture Search
(REVIEW 1). The tape will run in reverse at high
speed and you will be able to see the picture.
REVIEW will appear on the Front Panel Display.
Press
REW
again to enter Reverse Jet Search
(REVIEW 2). The tape will run in reverse at extra
high speed and you will be able to see the picture.
REVIEW will blink on the Front Panel Display.
Press
PLAY
to resume playback.