Go-Video VHS-VHS VCR User Manual


 
CHAPTER 3 - PROGRAMMING YOUR DUAL-DECK VCR 39
Deck One/Deck Two Menu
Record Speed [Menu, 1]*
1. Press
1
to select this item. Subsequent pressings
of this number will cycle this feature between
SP and EP.
You can also use
SELECT
(Mute button) to highlight
this item and
CHANGE
(LCV button) to change
this feature.
2. When the desired setting is shown on the screen,
either press
MENU
to exit this menu or move to
another item.
Tape Length [Menu, 2]
It is important to select what length of tape you are
using for the Auto speed setting in Timer Record to
work. Note your tape box to see what length tape is.
1. Press
2
to select this item. Subsequent pressings
of this number will cycle this feature between
T120, T160, T180, and T200.
You can also use
SELECT
(Mute button) to highlight
this item and
CHANGE
(LCV button) to change
this feature.
2. When the desired setting is shown on the screen,
either press
MENU
to exit this menu or move to
another item.
NOTE:
Press
MENU
until you get the desired
menu-Deck One or Deck Two.
NOTE:
SP will give you the best quality.
However, you must determine whether
there is enough time on the tape to
record the entire selection. If there is
not enough time to record the entire
selection in SP, you can set record
speed to EP. Be sure to set the correct
tape length in this menu.
*
NOTE:
If you press
MENU
and do not get the
Features menu, continue pressing
MENU
until you see the Features menu.