Go-Video VHS-VHS VCR User Manual


 
CHAPTER 3 - PROGRAMMING YOUR DUAL-DECK VCR 41
Record Source [Menu, 4]
1. Press
4
to select this item. Subsequent pressings
of this number will cycle this feature between
AUTO, Deck One, TUNER, and AUX on Deck Two.
(Deck One record sources are TUNER and AUX.)
You can also use
SELECT
(Mute button) to highlight
this item and
CHANGE
(LCV button) to change
this feature.
2. When the desired setting is shown on the screen,
either press
MENU
to exit this menu or move to
another item.
If AUTO is selected, the current view is automatically
selected when the
RECORD
key is pressed.
If Deck One is selected, you will record the tape
playing in Deck One or Tuner if Deck One is stopped.
TUNER records the channel you select on your VCR.
When AUX is selected, the incoming signal is from the
front or rear panel jacks and this is what is recorded
when you press the
RECORD
key.
Hi-Fi Audio [Menu, 5]
When you Select ON, this means that during tape
playback you will hear the Hi-Fi audio track on your
tape; if you select OFF, you will hear the monaural
linear audio track on your tape. This feature is useful
when playing a tape with voice-over narration.
1. Press
5
to select this item. Subsequent pressings
of this number will cycle this feature between ON
and OFF.
You can also use
SELECT
(Mute button) to highlight
this item and
CHANGE
(LCV button) to change
this feature.
2. When the desired setting is shown on the screen,
either press
MENU
to exit this menu or move to
another item.
NOTE:
Hi-Fi Audio automatically resets to ON
when the VCR power is turned off to
prevent accidental omission of the Hi-Fi
Audio track during Copy Tape. If Hi-Fi
Audio is set to OFF during Copy Tape, the
original monaural linear audio track will
be copied to both the linear and Hi-Fi
audio tracks on the duplicate tape.