Go-Video VHS-VHS VCR User Manual


 
APPENDIX B - GLOSSARY 59
Glossary
APPENDIX
B
ACTIVE DECK The deck you have control of. To see which deck that
is, look at the LEDs on the front panel of the VCR.
Use the Deck Select key to control which deck
is active. Green = Deck One and Red = Deck Two.
ALWAYS A Timer Recording Event which starts every day of the
week (Sunday - Saturday).
AMERICHROME COPY Special circuitry which gives particularly high quality
tape duplication. This is also called HQ Copy.
ATR Auto tracking. Automatically adjusts the tracking for
better picture quality. Pressing the PLAY key for 1.5
seconds initiates this feature.
AUDIO COPY INSERT The ability to record new audio from the audio input
jacks on the front panel when copying a tape.
AUTO A preset automatic feature.
CATV Cable television channel assignments.
CH MEMORY During Auto Programming, in the Tuner Setup
menu, the VCR selects the channels it can tune in, to
add to the channel list used.
CLEAR A button on the remote control which allows you
to clear programming entries in the Timer Recording
menu. It also resets the counter to zero for the
active deck.
CHANNEL Two buttons on the remote control and on the front
panel which allow you to change to the next higher or
next lower channel. If you use these buttons, the VCR
will only stop at the channels you have programmed
into Channel Memory in the Tuner Setup menu.
COUNTER A display that describes the relative position of the
tape in hours, minutes and seconds.
COPY TAPE A key that initiates the duplicating of a tape in Deck
One to a tape in Deck Two.
CTR The counter key on the remote control.