Grundig GULCD20S/DVD TV DVD Combo User Manual


 
-13-
Quick TV Set-Up Guide
Adjusting the view angle
1. Connect adaptor to power input of TV.
2. Connect adapor to power cord.
3. Connect the other end of power cord to power supply.
Connect antenna or CATV cable to the antenna port
of the tuner box.
1. If power input is connected correctly, the LED on the front panel becomes
(i.e. stand-by mode). Press the POWER button on the function panel OR press
the red POWER button ” of the remote control. The TV will switch on and the
LED on the front panel becomes green.
2. To switch the TV off, press the POWER button on the function panel OR press the
red POWER button “ ” of the remote control. The TV will switch off and go to
the stand-by mode.
Amber
Press down on the stand and gently adjust the set to a
suitable viewing angle.
Power connection
Connecting to An Aerial
Turning ON/OFF the TV
1. Press the AV key and select input source to TV.
2. Press the MENU key on the remote control to show the On Screen
i Menu (OSD).
3. Press key to select the TV icon on the top of screen.
4. Press key to high-light Auto Scan option. Then press key to
select the Auto Scan option.
5. Once scanning is finished, press MENU to exit.
D splay
ut
pq u
Auto Scan channels
If you would like the channels on certain numbers please refer to 'Manual scan'
on page 24.
2
5
4
4
3
1
POWER
75