Filter
Top Products
28
GENERAL FUNCTIONS
_____________________________________________________________
Muting
With this function the DVD Micro System mutes the connected loudspeakers.
1 Press »d« on the remote control to switch it on mute.
– Display on the DVD Micro System »MUTING« flashes.
2 Briefly press »d« on the remote control again to cancel the muting.
– Display on the DVD Micro System: briefly »MUTING« after which it
disappears.
Selecting sound settings
You can choose between four different sound settings (CLASSIC, ROCK, JAZZ,
POP). The default setting is FLAT.
1 Select the desired sound setting, to do this, press »PRE EQ/BBS« on the
remote control briefly and repeat.
– Display on the DVD Micro System: briefly »FLAT«, »CLASSIC«, »ROCK«,
»JAZZ« or »POP«, and then »CLASSIC«, »ROCK«, »JAZZ« or »POP« are
displayed constantly.
Setting the surround mode
You can switch on Dolby Pro Logic II (multi channel mix) during disc playback
and select various surround sound effects. If Dolby Pro Logic II is switched off,
playback is conducted with 2.1 channel stereo sound.
1 To switch between two-channel mode and Dolby Pro logic II effects, press
»MODE« on the remote control repeatedly.
– On-screen displays: in the following sequence: »STEREO«, »PRO
LOGIC«, »PL II VIRTUAL«, »PL II MUSIC«, »PL II MOVIE« or »PL II
MATRIX«.
– Displays on the DVD Micro System: in the following sequence: »STEREO«,
»PRO LOGIC« and »ijPRO LOGIC II«, »VIRTUAL« and »ijPRO LOGIC II«,
»MUSIC« and »
ijPRO LOGIC II«, »MOVIE« and »ijPRO LOGIC II«,
»MATRIX« and »
ijPRO LOGIC II«.
General information on disc playback
If the » « symbol appears on the television screen after entering particular
commands, it means the disc itself has a limited set of functions.
MUTING
CLASSIC
CLASSIC
ijPRO LOGIC II
VIRTUAL
28