Filter
Top Products
38
TUNER MODE ________________________________________________________________
Selecting the tuner input source
1 Select the input source with »FM TUNER AM« on the DVD Micro System or
with »TV AM/FM« on the remote control.
– The most recently selected radio station is played (Last Station Memory).
– Display on the DVD Micro System: frequency band and frequency, or
station name.
Selecting the waveband
1 Select FM (VHF) or AM (medium wave) with »FM TUNER AM« on the
DVD Micro System or »TV AM/FM« on the remote control.
– Display on the DVD Micro System: »FM« or »AM« and the frequency.
Calling up stored radio stations
1 Select the desired preset channel position with »1 ... 0« or »DOWN
PRESET« or »PRESET UP« on the remote control.
– Display on the DVD Micro System: briefly, e.g. »06 100.
60
MHz«.
RDS station service
RDS (Radio Data System) is an information system which is provided additional-
ly by most FM stations. If the DVD Micro System is currently receiving an RDS
station, the station name, e.g. »ENERGY«, and »F« appear in the display.
Searching for RDS stations
1 Search for the desired RDS station by repeatedly pressing » TUNING 3«
or » TUNING 4« until an RDS station is received and »F« appears in
the display.
– After a short time the station name appears if the reception strength is
sufficient.
Note:
It may take some time before all the RDS information is available.
Calling up RDS information
If an RDS station is being received, various station information can be called up
in the display. The information remains in the display as long as no other infor-
mation is called up.
1 Press »
DISPLAY/DIM
« repeatedly.
– The channel position, waveband and frequency, station name, radio text in
ticker text, station type, RDS time, PI code and then the channel position
with the waveband and frequency appear in that order.
FM 100.60
MHz
06 100.60
AM 1404
KHz
F
ENERGY
38