Filter
Top Products
68 hp digital entertainment center owner’s guide
home networking
All home networking parameters are configured (and networking is enabled) for broadband
users who are sharing a broadband connection through a router. Dial-up users can install the
digital entertainment system onto a home network by entering the appropriate IP address,
network mask, gateway and name server. See “installing and setting up” on page 75 for
information about these settings.
1 From the settings menu, select Network Settings, then select Advanced network
settings.
2 Select Modify advanced settings, then select Home networking.
3 Make changes as appropriate.
file sharing
To copy music files from your PC to your digital entertainment center across your home
network (see “copying music from a networked PC” on page 33), you must enable file
sharing on your digital entertainment center.
The default setting is to have file sharing disabled. If your digital entertainment center is not
protected from the Internet (by, for example, a router that serves as a firewall), you may wish
to keep file sharing disabled while you’re not using it, to keep outside users from accessing
your digital entertainment center.
To enable file sharing:
1 From the settings menu, select Network Settings, then select Advanced network
settings.
2 Select Modify advanced settings, then select Enable file sharing.
3 Specify your network’s workgroup name. Select Done to accept the default
(WORKGROUP) or select Edit and use the onscreen keyboard to make changes.You
can find your home network’s workgroup name in your PC’s network settings.
To disable file sharing, select Disable file sharing.