HP (Hewlett-Packard) HP z558 Flat Panel Television User Manual


 
HP Digital Entertainment Center TV/Display Setup Guide 13
5 Click the OK button to apply the changes.
6 When the HP Digital Entertainment Center image appears on the TV screen, click Yes to keep the setting. You
have 15 seconds to accept this new setting before it reverts to the previous setting. If the new setting is not
correct, wait for 15 seconds and the previous screen displays.
7 Click the OK button to save changes and close the window.
NOTE: Your screen image should be correctly sized at this point. If your picture in DVI is not satisfactory, see
“Blurred screen text” on page 30.
Adjust Composite Video and
S-video Screen Size
You can adjust the composite video and S-video display
using the desktop. To optimize the HP Digital
Entertainment Center video image so it fits your TV
screen with S-video and video (composite) connections:
1 Close or minimize Media Center.
2 Right-click the desktop, select nVidia Display, TV,
TV Settings, and then Device Adjustments. The
Device Adjustments window opens.
3 Click the buttons inside the TV
image to increase or decrease
the screen size.
4 Click the buttons around the
edges to center the screen
position.
5 Click the OK button to save the changes. Click the
OK button close the window.
NOTE: To solve S-video and composite Video Out problems relating to the HP Digital Entertainment Center,
see “Video Troubleshooting” on page 15.