Filter
Top Products
HP Digital Entertainment Center TV/Display Setup Guide 29
Reload the graphics driver
To reload the graphics driver to correct a blank or distorted screen in component video:
1 Connect another video out. See page 27.
2 Click Control Panel, Add or Remove Programs.
3 Select NVIDIA Drivers, Remove. Click Yes and Yes to erase saved nView profiles.
4 Click Yes to restart the HP Digital Entertainment Center.
5 After the system restarts, click OK at the Media Center video card error message.
6 Close Media Center.
7 Click Control Panel, All programs, PC Help and Tools, HP Application Recovery. The Application
and Driver Recovery window appears.
8 Select Driver Installation to reinstall the drivers shipped with the HP Digital Entertainment Center and click
Next.
9 Select NVIDIA Graphics Driver and click Install. The driver installs. Click Cancel.
10 Reconnect to component video. See page 28.
Wrong colors or erratic video on screen
Problem: During the Media Center optional setup, if your display uses a component video connection, the
wizard may change the display color depth and show wrong colors or erratic video. This may occur if you select
a resolution that is not supported by your TV/Display. The component video cables might not be plugged in
correctly.
Solution: If the colors look wrong, or the video seems erratic, do the following:
1 See “Check component video” on page 23.
2 See “Correcting an extended blank screen with component video out” on page 25.
Line at bottom of the screen
Problem: The TV/Display shows a line below the image during DVD
playback.
Solution: While playing the DVD, click More Info, Zoom. Select the zoom that best fits your screen.