Filter
Top Products
12 HP High-Definition LCD TV Service Manual
Controlling the Onscreen Display
The onscreen display (OSD) is controlled by using the remote control or the bezel buttons on the left side of the TV.
The TV indicators (A and B) are located on the front of the TV.
TV Indicators and Controls
POWER Power button turns on the TV or places it in standby mode.
MENU Menu displays the onscreen display (OSD) or closes the OSD menu.
SELECT SELECT starts the Auto Sync function for a connected PC signal. In an OSD
menu, selects the highlighted item in the OSD.
SOURCE Source (SRC) selects the input Menu. In an OSD menu, this functions as a
back button or moves you up one item or menu level.
+CH
–CH
Channel (CH) selects the next or previous channel. In an OSD menu, press
these buttons to move up or down in the menu.
+VOL
–VOL
Volume (VOL) raises or lowers the sound level. In an OSD menu, press these
buttons to move right or left in the menu or to adjust an item.
A - LED Indicator Amber: TV is powering on (light turns off after about 30 seconds).
HP Aqua Blue: TV is off but plugged into the power source.
No light: TV is on or AC power cord is disconnected.
B - Remote
Control Sensor
Receives the signal from the remote control.