Hitachi 20VR2W TV VCR Combo User Manual


 
Important
3
Important
We are pleased to introduce you to one of the most sophisticated products
available today. Please take time to fill out the information requested on
the right. The serial number is on the tag located on the back of your
TV/VCR Combination. Be sure to retain this manual as your convenient
TV/VCR Combination information source.
Date of Purchase _
Dealer Purchased From _
Dealer Address _
Dealer Phone No _
Model No. 20VR2
Serial No. _
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral
triangle, is intended to alert the user to the presence of uninsulated
"dangerous voltage" within the TV/VCR Combination enclosure that may be
of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the TV/VCR Combination.
WARNING:
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS TV/VCR
COMBINATION TO RAIN OR MOISTURE.
There are no user serviceable parts inside the TV/VCR Combination.
 Never remove the back cover of the TV/VCR Combination, as this can
expose you to a very high voltage and other hazards.
 If the TV/VCR Combination does not operate properly, unplug the set and
call your dealer or service shop.
WARNING:
POWER SOURCE
 This TV/VCR Combination operates only on AC 120 volts 60 Hz.
 To prevent fire or shock hazard, connect this TV/VCR Combination to 120
V AC 60 Hz (house current) ONLY. Never connect the TV/VCR Combination
to 50 Hz or DIRECT CURRENT POWER SOURCES.
 This TV/VCR Combination is equipped with a polarized alternating current
line plug (a plug having one blade wider than the other).
This plug will fit into the receptacle only one way.
If you are unable to insert the plug fully into the receptacle, try reversing the
plug.
If the plug should still fail to fit, contact a local electrician.
 To prevent shock hazard do not use this polarized plug with an extension
cord, receptacle or other outlet unless the blades can be fully inserted to