Hitachi 37LD9700U Flat Panel Television User Manual


 
19
ENGLISH
Information
How to secure the cables.
After connecting all of the cables to the terminals, secure them with the band.
When you secure the cables, please be careful not to tighten too much.
CAUTION
Use only the Power Cord provided.
Do not use a power supply voltage other than that indicated(AC220-240V, 50Hz). It may cause re or electric shock.
For the LCD television, a three-core power cord with a ground terminal is used for ef ciency protection. Always be sure
to connect the
Power Cord
to a grounded outlet and make sure that the cord is properly grounded. If you use a power
source converter plug, use an outlet with a ground terminal and screw down the ground line.
Ensure that both ends of power cord are easily accessible.
If you have to change the power cord, please use the certi ed power cord that meets your region’s safety standard.
UK only
Except UK
How to fasten the band:
To tighten
To loosen
Pull the band in the
direction of the arrow.
Loosen the band by
pushing the knob in the
direction of the arrow.
Knob
With long band
Licensed by BBE Sound, Inc. under
one or more of the following US
patents : 5510752, 5736897.
BBE and BBE symbol are registered
trademarks of BBE Sound, Inc.
WOW, SRS and symbol are
trademarks of SRS Labs, Inc.
SERVICE USE ONLY
C.1 C.2
INPUT(RGB)
ANALOG RGB
INPUT(HDMI)
PC
AUDIO
AUDIO
A C
INPUT
(AV1)
INPUT
(AV2)
INPUT
(AV3)
INPUT
(AV4)
ANT
OUTPUT
AUDIO
VIDEO
SUB WOOFER
POWER SWIVEL
HDMI2
HDMI1
L
C
P
R PB
L
MONO
R
R
Y/VIDEO
AUDIO
COMMON
INTERFACE
CONNECTION (continued)
Connecting Procedure (continued)
4. Connecting the plug into the wall socket
Connect the Power Cord after completing all other connections.
(The type of plug is different from this drawing for some countries.)