Hitachi 37LD9700U Flat Panel Television User Manual


 
46
Timer Programming
DIGITAL TERRESTRIAL TELEVISION (DTT) OPERATION (continued)
From “Timers” Menu
You can record multiple programmes from “Timers Menu”.
1. Press
MENU
button on the remote control.
2. Select “Timers” from the DTT main menu.
From EPG Screen
If you nd the programme you wish to record on EPG screen, you can directly set the timer from EPG screen.
1. Press button to display EPG menu.
2. Using button, select the programme you wish to record.
3. Press
OK
button so that it leads to the Timers menu screen.
4. After con rming the setting, press button to return to EPG screen.
PROGRAMME TIMERS
No Channel Name Start End Date Mode
More
i+
Edit TimerExitToggle Mode
OKMENU
19:54
11/05/2005
1. ITV 1 20:00 21:00 12/05/2006 Active
2. BBC TWO 08:00 09:00 12/06/2006 Active
3. BBC THREE 10:00 11:00 12/06/2006 Active
4. BBC ONE 01:00 01:00 01/01/2006 Inactive
5. BBC ONE 01:00 01:00 01/01/2006 Inactive
6. BBC ONE 01:00 01:00 01/01/2006 Inactive
7. BBC ONE 01:00 01:00 01/01/2006 Inactive
8. BBC ONE 01:00 01:00 01/01/2006 Inactive
Name:
Start:
End:
Date:
Mode:
3. ITV 1
20:00
[2] 1:00
12/05/2006
Once
3. Highlight the item on the row of “Mode” using button.
4. Press
OK
button to display the timer entry window.
5. Set channel name using
button.
6. Set Start Time, End Time, and Date with the numeric buttons.
7. Set the frequency mode (Once, Daily, or Weekly) using
button.
8. Press
MENU
button to return to the Timer Screen. The mode will
automatically be set to “Active” if time and date are valid. (The
message “Entered time is not valid” is displayed if invalid and
“Please choose a date and time in the future” is displayed if
not input.).
9. Press
MENU
button or
OK
button to set up.
10.The message appears to ask “Switching to timer channel”
to remind you that the selected programme is about to start. If
in menu operation or displaying other than channel programme
screen, the message “A programme that you set a timer for
has started. Would you like to switch to [channel name]?” is
displayed.
* The selected channel can be watched or recorded via Scart 1
Output. Refer to
15
for the details.
NOTE
• Timer Programming can be set until 31, Dec 2037.
• You can set timers up to 8 programmes in total. If you try to set more than that, the box will ask you to deactivate
one of them.
• A timer can not be set if it is overlapped with another. The box will appear if there is an overlap timer.
Timer Programming is available to not only record multiple programmes but also remind you that the desired
programme is about to start whilst you are watching another channel.