Filter
Top Products
FRONT PANEL CONTROLS
FRONT VIEW
-
MENU Button
This button allows you to enter the MENU, making it possible to set TV features to your preference without using
the remote.
INPUT/EXIT button
Press this button to select the current antenna source, VIDEO: 1, 2, or alternate antenna source. Your selection
is shown in the top right corner of the screen. This button also serves as the EXIT button when in MENU mode.
CHANNEL Selector
Press these buttons until the desired channel appears at the top right corner of the TV screen. These buttons also
serve as the cursor down (
) and up ( ) buttons when in MENU mode.
VOLUME Level
Press these buttons for your desired sound level. The volume level will be displayed on the TV screen. These
buttons also serve as the cursor left (
) and right ( ) buttons when in MENU mode.
POWER Button
Press this button to turn the TV on or off.
NOTES:
Your HITACHI Projection TV will appear to be turned OFF if there is no video input when VIDEO: 1 or 2 is
selected. Check the POWER Light to make sure the TV is turned off when not in use.
To see an auto-demonstration of the on-screen displays with HELP text displayed, press and hold the POWER
button on the TV set for approximately five seconds. Press the POWER button on the TV again to end the auto-
demonstration.