Filter
Top Products
INPUT 2 provides Y-CB-CR jacks for connecting equipment with this capability, such as a DVD.
NOTES:
DO NOT connect standard VIDEO or S-VIDEO to INPUT 2 when using Y-CB-CR input.
When using the Y-CB-CR input jacks, connect your components audio output to the TV's INPUT 2 Left and Right
Audio input jacks.
Your component outputs may be labeled Y, B-Y, and R-Y. In this case, connect the components B-Y output to
the TV's CB input and the components R-Y output to the TV's CR input.
It may be necessary to adjust TINT or turn AUTO COLOR-ON to obtain optimum picture quality when using the Y-
CB-CR inputs. (See pages 47 and 48.)
To ensure no copyright infringement, the MONITOR OUT output will be abnormal, when using the Y-CB-CR
jacks.
When using the Y-CB-CR jacks, INPUT 2 will be viewed as a blank PIP sub-picture. (see page 22
(7) Speaker Matrix Surround Switch
Use this switch to choose between the surround and external speaker features. See Page 17 for AUDIO
SYSTEM SETUP. The TV's Internal Speakers will be switched off when "EXT." is selected.
(8) REAR SPEAKER Terminals
These terminals are used to connect external speaker, which are used for the surround sound feature. The
volume level is controlled by the television's main volume buttons. Use speaker with 8-Ohm impedance only.
Click here for setup diagram.
Typical full feature setup. Follow connections that pertain to your personal entertainment system.
REAR SPEAKER TERMINAL CONNECTIONS
CONNECT AFTER TURNING THE POWER TO THE TV OFF.
Press the Right Speaker red button and insert the positive (+) lead wire into the hole next to the button. Once the
wire is in place, pull the red button back to original position and the wire is locked into place. In the same manner,
press the Right Speaker black button and insert the negative (-) lead wire. Repeat this procedure for the Left
Speaker.
CAUTION: Do not short speaker terminal, (do not connect a wire directly across any two terminals). This
could cause damage to your audio outputs or other damage to your TV.
CAUTION: Do not connect speakers simultaneously to the REAR SPEAKER terminal of the Projection
TV and an external amplifier. This could damage both the TV and the speakers. Your TV was designed to use 8-
Ohm speakers only. Any other type may degrade the audio performance of your entertainment system..