Filter
Top Products
When an S-VIDEO
Input is connected to
VIDEO: 1.
When an COMPONENT
VIDEO: Y-CB-CR Input
is connected to
VIDEO: 2.
(9) MENU, CURSOR Buttons
All the On-Screen Display features can be set or adjusted by using these buttons.
The MENU button will start the On-Screen Display.
The CURSOR buttons will highlight functions or adjust and set different features.
(10) SLEEP Button
Press this button to display the sleep timer in the lower left corner of the screen. Every subsequent press of this
button will add 15 minutes to this timer, up to a maximum of three hours. Once set, use RECALL to view time
remaining. If the SLEEP button is pressed while the timer is set, it will reset to the original condition.
(11) INPUT Button
The INPUT button will select between antenna signals and the two sets of video input jacks each time the button
is pressed. If the Picture-in-Picture is on, the INPUT button will select between the two sets of video input jacks
and antenna source when main channel is chosen with the PIP CH button. If the sub-picture is chosen, the INPUT
button will select between the two sets of video input jacks and the ANT A antenna source (ANT B cannot be
displayed as a PIP sub-picture and COMPONENT VIDEO: Y-CB-CR INPUT 2 source will be displayed as a
blank PIP Sub picture.)
PICTURE-IN-PICTURE (PIP)
Your HITACHI Projection TV incorporates Dual Tuner technology designed for improved viewing enjoyment. This
Dual Tuner feature allows you to view antenna input on both the main picture and sub-picture simultaneously,
with separate tuning control for each. The Dual Tuner can operate with only one (ANT A only) or two inputs (ANT
A and ANT B).
ANT A input can be viewed as both the main picture and the sub-picture simultaneously. ANT B and
COMPONENT: Y-CB-CR Input 2 sources can only be viewed as a main picture. To select between main picture